Reasons to Choose Our Dell EMC DES-3128 Exam Dumps

Dell EMC DES-3128 Exam Dumps - Curated by Subject Matter Experts

Are you tired of getting Dell EMC DES-3128 dumps with wrong answers? Don’t worry now because our Specialist - Implementation Engineer, NetWorker Exam dumps are curated by subject matter experts ensuring every question has the right answer

Prepare Your Exam with Dell EMC DES-3128 Dumps on Any Device

We facilitate you by offering our Dell EMC DES-3128 exam dumps in three different formats (PDF file, Offline, and Online Practice Test Software)

Self-Assess Your Implementation Engineer Exam Preparation

Self-Assess Your Dell EMC DES-3128 exam preparation with our DES-3128 dumps enriched with various features such as time limit, personalized result page, etc

Eliminate Risk of Failure with Dell EMC DES-3128 Exam Dumps

Schedule your time wisely to provide yourself sufficient time each day to prepare for the Dell EMC DES-3128 exam. Make time each day to study in a quiet place, as you'll need to thoroughly cover the material for the Specialist - Implementation Engineer, NetWorker Exam . Our actual Implementation Engineer exam dumps help you in your preparation. Prepare for the Dell EMC DES-3128 exam with our DES-3128 dumps every day if you want to succeed on your first try.

Q1.

A backup administrator needs to create a new NSR Client "ABC 123" and PSS file system backup save sets /data01 and /data02. They also need to create a skip files directive named "Skip GO" for * go extensions anywhere under data02

Use the simulator to achieve this

When you have finished, continue to the next question.

q1_DES-3128

AExplanation:
To create a new NSR Client 'ABC 123' and PSS file system backup save sets /data01 and /data02, and a skip files directive named 'Skip GO' for * .go extensions anywhere under /data02, the administrator can use the Networker CLI (Command Line Interface) to access the Networker server and create the NSR Client, PSS file system backup save sets, and skip files directive. Here are the steps:
Log in to the Networker CLI by entering the following command:
nsr_client -C ABC 123
Once logged in, create a new PSS file system backup save set for /data01 by running the following command:
savefs -p -s /data01
Create a new PSS file system backup save set for /data02 by running the following command:
savefs -p -s /data02
Create a skip files directive named 'Skip GO' for * .go extensions anywhere under /data02 by running the following command:
savefs -p -s /data02 -k '* .go'
Verify that the new NSR client, PSS file system backup save sets and skip files directive have been created by running the following command:
nsr_client -l
Verify that the new PSS file system backup save sets are correctly associated with the new NSR client by running the following command:
nsr_client -G ABC 123

Answer: A

Q2.

A customer has configured 3 new Linux server named Server01 as a backup client. They cannot see any files backed up when a restore operation is attempted

Use the simulator to resolve the issue.

q2_DES-3128

When you have finished, continue to the next Question

AExplanation:
To troubleshoot why a customer cannot see any files backed up when a restore operation is attempted on their 3 new Linux server named Server01, the first step should be to check the log files for any error messages. The log files are typically located in the /var/log/ directory, but the exact location may vary depending on the operating system being used.
Next, the administrator should check the configuration of the NetWorker server to ensure that the server is configured correctly. This includes checking the client configuration for the Server01 and making sure that the correct client name is being used. Additionally, the administrator should make sure that the Server01 has the correct address and port information, as well as the correct credentials.
The administrator should also check the configuration of the server to make sure that the correct backup policies are being used and that the backup schedule is configured correctly. Additionally, they should check the configuration of the actual backup device, such as the tape library or disk array, to make sure that it is configured properly.
Finally, the administrator should check the filesystem of the Server01 to make sure that the backup files are actually being written to the correct location.

Answer: A

Q3.

An administrator wants to make sure Oracle backups only use a specific storage node.

Use the simulator to configure an AFTD Device on "StorageNodeA" with the name "OracleBackup" using the folder "D \AFTD" to the pool "Default". This storage node should be a dedicated storage node

q3_DES-3128

When you have finished, continue to the next question.

AExplanation:
To configure an AFTD device on 'StorageNodeA' with the name 'OracleBackup' using the folder 'D:\AFTD' to the pool 'Default', the administrator can use the Data Domain CLI (Command Line Interface) to access the Data Domain system and create the AFTD device. Here are the steps:
Log in to the Data Domain CLI by entering the following command:
ssh admin@StorageNodeA
Once logged in, create a new AFTD device named 'OracleBackup' by entering the following command:
ddboost afd create --name OracleBackup --pool Default --folder D:\AFTD
Verify that the new AFTD device has been created by running the following command:
ddboost afd show --name OracleBackup
To make sure that the Oracle backups only use the specific storage node, you can assign the AFTD device to the Oracle backup host by running the following command:
ddboost afd set --name OracleBackup --host OracleBackupHost
Verify the configuration by running the following command:
ddboost afd show --name OracleBackup
To make sure that the StorageNodeA is a dedicated storage node, you can configure the storage node to only allow the OracleBackup host to use the AFTD device by running the following command:
ddboost host access add --host OracleBackupHost --afd OracleBackup
Finally, the administrator should select the ''Apply'' button to save the configuration.

Answer: A

Q4.

A customer has installed a new PowerProcted DO series appliance named DD0. The DD Boost user name is ddboost and the password is abc123. A single DD Boost device named DD01.SU01 labeled to DO.VMware_Pool is needed

Use the simulator to create the desired configuration

When you have finished, continue to the next question.

q4_DES-3128

AExplanation:
To create the desired configuration, you will need to use the Data Domain CLI (Command Line Interface) to access the DD Boost device and create the new appliance. Here are the steps:
Log in to the Data Domain CLI by entering the following command:
ssh ddboost@DD0
Enter the password 'abc123' when prompted.
Once logged in, create a new DD Boost device named DD01.SU01 by entering the following command:
ddboost device create --name DD01.SU01 --type vmware --pool DO.VMware_Pool
Verify that the new device has been created by running the following command:
ddboost device show --name DD01.SU01
Configure the DD Boost device to connect to the PowerProcted DO series appliance by running the following command:
ddboost device set --name DD01.SU01 --dd-host DD0
Verify the configuration by running the following command:
ddboost device show --name DD01.SU01

Answer: A

Q5.

An administrator already added a client "CLientA" This client has recently been assigned a second DNS named "ClientAB"

When the backup ran, the following error is observed

"The client ClientAB is not in backup servers' clients list."

Use the simulator to resolve this issue

q5_DES-3128

When you have finished, continue to the next question

AExplanation:
The steps to resolve the issue of the client 'ClientAB' not being in the backup server's clients list are as follows:
Verify the client name:
On the NetWorker server, open the NetWorker Management Console.
Go to the Clients tab.
Verify that the client 'ClientA' is present in the list of clients.
Verify that the client 'ClientAB' is not present in the list of clients.
Update the client name:
On the NetWorker server, open the NetWorker Management Console.
Go to the Clients tab.
Click on the ClientA.
In the Client Name field, update the name to 'ClientAB'
In the Client Address field, enter the IP address or hostname of the client.
Click on the OK button to save the changes.
Re-schedule the backup
Go to the Clients tab.
Click on the ClientAB.
Go to the Schedules tab.
Remove the current schedule and create a new schedule for the client.
Select the appropriate schedule for the backup.
In the Save Set field, select the save set that you need to backup.
Click on the OK button to schedule the backup.
Monitor the backup process
Monitor the backup process to ensure that it is running successfully.
Check the logs for any errors.

Answer: A

Dell EMC DES-3128 Exam Candidates Are also Interested In:

How To Get Sample Questions And Answers For Dell EMC DES-3128 Exam ?,

Specialist - Implementation Engineer, NetWorker Exam Mock Test,

Dell EMC Implementation Engineer Exam Dumps,

Are You Looking for More Updated and Actual Dell EMC DES-3128 Exam Questions?

If you want a more premium set of actual Dell EMC DES-3128 Exam Questions then you can get them at the most affordable price. Premium Implementation Engineer exam questions are based on the official syllabus of the Dell EMC DES-3128 exam. They also have a high probability of coming up in the actual Specialist - Implementation Engineer, NetWorker Exam .
You will also get free updates for 90 days with our premium Dell EMC DES-3128 exam. If there is a change in the syllabus of Dell EMC DES-3128 exam our subject matter experts always update it accordingly.

GET DES-3128 EXAM PREMIUM ACCESS