Eliminate Risk of Failure with CompTIA 220-1201 Exam Dumps
Schedule your time wisely to provide yourself sufficient time each day to prepare for the CompTIA 220-1201 exam. Make time each day to study in a quiet place, as you'll need to thoroughly cover the material for the CompTIA A+ Certification Exam: Core 1 exam. Our actual CompTIA A+ exam dumps help you in your preparation. Prepare for the CompTIA 220-1201 exam with our 220-1201 dumps every day if you want to succeed on your first try.
All Study Materials
Instant Downloads
24/7 costomer support
Satisfaction Guaranteed
SIMULATION
A user reports poor performance on the application server.
INSTRUCTIONS
Click on Server 1 and Server 2 and review the information presented in each chart to
determine which drives need to be replaced.
Select the appropriate replacement drive that should be used, for the least performance degradation to the server.
If at any time you would like to bring back the initial state of the simulation, please click the Reset All button.
See the explanation below.
The degraded status on Server 2 indicates a RAID-5 issue, typically due to a failed or failing drive. In RAID-5 configurations, when one drive fails, the system can still operate but with reduced performance as parity data is used to rebuild missing data on-the-fly.
Recommended Replacement Drive:
To minimize performance degradation, the replacement drive should be:
SAS HDD with the same specifications (64KB stripe size, no read-ahead, and write-back policy).
Matching the configuration exactly ensures seamless integration and optimizes recovery speed in the RAID-5 array.
In RAID-5, degraded performance is expected when one drive fails, as parity data needs to rebuild missing information during each read/write process. Replacing the failed drive restores the RAID array to optimal status, reducing the load on existing drives and returning the system to normal read/write performance. The write-back policy and disabled disk cache settings are designed to reduce latency and increase efficiency, essential for handling real-time applications.
A user reports poor performance on the
application server.
INSTRUCTIONS
Click on Server 1 and Server 2 and review
the information presented in each chart to
determine which drives need to be replaced.
Select the appropriate replacement drive
that should be used, for the least
performance degradation to the server.
SIMULATION
A third-party contractor recently installed a new switch, router, and cabling for a small
corporate office. After the installation, users started experiencing issues connecting to
resources over the network.
INSTRUCTIONS
Click on each PC and server to review outputs. From the remediation section on
the right, select an issue and solution for each device.
See the explanation below.
Looking at the network configurations and outputs from both PCs and servers, here are the possible issues and solutions:
1. PC 1
Issue: The IP address for PC1 is 192.168.1.1, which conflicts with Server 1 (which also uses 192.168.1.1).
Solution: Change the IP address on PC1 to a unique one within the range, like 192.168.1.3.
2. PC 2
Issue: PC 2 is configured with 192.168.1.2, which conflicts with Server 2 that has the same IP address.
Solution: Update the IP address on PC 2 to something unique, like 192.168.1.4.
3. Server 1
Issue: The IP address for Server 1 is 192.168.1.1, which conflicts with PC1.
Solution: Since Server 1 and PC1 are using the same IP address, change one of them. For Server 1, you could change the IP address to 192.168.1.5.
4. Server 2
Issue: Server 2 is using the IP address 192.168.1.2, which conflicts with PC2.
Solution: Update Server 2 to use a different IP address, such as 192.168.1.6.
General Remediation:
The primary problem here is overlapping IP addresses, leading to connectivity issues. Each device on the network must have a unique IP address. After making these changes, ensure that all devices can communicate properly by testing the connection between devices and verifying they can access shared resources.
SIMULATION
A technician is installing a wireless access point and is required to run all cabling and make patch cords if necessary.
INSTRUCTIONS
Part 1
For each cable type, click the (+) to select the appropriate connector and tool.
part 2
An access point was moved and no longer has connectivity. Connect the access point, patch panel, and switch by clicking the (+) to select the appropriate cable end for each corresponding location to create a link.
The link will be visible after making the second selection of each pair.
Cable ends may be used multiple times, and all placeholders will be filled.
See the explanation below.
Check the exhibit diagram for both parts.
Part 2
SIMULATION
A small ISP has hired a new technician Joe, the new technician, is being trained to configure customers* home networks The trailing instructor gives me technician a starter kit with cables, cable ends, and other network equipment and asks mm to build a working network.
The computer should be connected to have internet connectivity and the phone should be connected to have a dial tone.
INSTRUCTIONS
Use the appropriate cables. cable ends, tools and equipment to configure the network ana connect an components accordingly
There are 3 steps and the simulation starts on step 1.
See the explanation below.
Answer of both steps below.
SIMULATION
Laura, a customer, has instructed you to configure her home office wireless access point.
She plans to use the wireless network for finances and has requested that the network be setup with the highest encryption possible.
Additionally, Laura knows that her neighbors have wireless networks and wants to ensure that her network is not being interfered with by the other networks.
She requests that the default settings be changed to the following.
Wireless Name: HomeWiFi
Shared Key: CompTIA
Router Password: Secure$1
Finally, Laura wants to ensure that only her laptop and Smartphone can connect to the network.
Laptop: IP Address 192.168.1.100
Hardware Address: 00:0A:BF:03:C4:54
Smartphone: IP Address 192.168.1.101
Hardware Address: 09:2C:D0:22:3F:11
INSTRUCTIONS
Configure Laura's wireless network using the network adapter window.
If at any time you would like to bring back the initial state of the situation, please click the Reset All button.
See the explanation below.
solution as
Are You Looking for More Updated and Actual CompTIA 220-1201 Exam Questions?
If you want a more premium set of actual CompTIA 220-1201 Exam Questions then you can get them at the most affordable price. Premium CompTIA A+ exam questions are based on the official syllabus of the CompTIA 220-1201 exam. They also have a high probability of coming up in the actual CompTIA A+ Certification Exam: Core 1 exam.
You will also get free updates for 90 days with our premium CompTIA 220-1201 exam. If there is a change in the syllabus of CompTIA 220-1201 exam our subject matter experts always update it accordingly.